Microchip Technology TC4424EPA
TC4424EPA
Please send RFQ , we will respond immediately.
Microchip Technology TC4424EPA information
Type
Parameter
Factory Lead Time
10 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
8-DIP (0.300, 7.62mm)
Number of Pins
8
Operating Temperature
-40°C~150°C TJ
Packaging
Tube
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
Subcategory
MOSFET Drivers
Max Power Dissipation
730mW
Technology
CMOS
Voltage - Supply
4.5V~18V
Terminal Position
DUAL
Number of Functions
2
Base Part Number
TC4424
Pin Count
8
Number of Outputs
2
Output Voltage
18V
Max Output Current
3A
Operating Supply Voltage
15V
Nominal Supply Current
2.5mA
Power Dissipation
730mW
Output Current
3A
Max Supply Current
2.5mA
Propagation Delay
75 ns
Input Type
Non-Inverting
Turn On Delay Time
23 ns
Max Output Voltage
25mV
Rise Time
35ns
Fall Time (Typ)
35 ns
Turn-Off Delay Time
25 ns
Rise / Fall Time (Typ)
23ns 25ns
Interface IC Type
BUFFER OR INVERTER BASED MOSFET DRIVER
Channel Type
Independent
Input Bias Current
10μA
Turn On Time
0.1 μs
Output Peak Current Limit-Nom
3A
Driven Configuration
Low-Side
Gate Type
N-Channel, P-Channel MOSFET
Current - Peak Output (Source, Sink)
3A 3A
High Side Driver
YES
Logic Voltage - VIL, VIH
0.8V 2.4V
Turn Off Time
0.1 μs
Height
4.06mm
Length
10.16mm
Width
6.6mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
TC4424EPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Tube represents the packaging method.Through Hole is the way in which it is mounted.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.Its configuration is based on a total of 8 terminations.There are various parts that can be found under its base part number TC4424.In this case, Through Hole indicates how the device is to be mounted.During design, it is configured with 8 pins.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 8 pins for component connections.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.This device is capable of delivering 3A current.This device has a maximum power dissipation of 730mW, indicating that it is capable of reducing power loss without overheating.For higher stability, the supply current should be kept at 2.5mA.The voltage it outputs is 18V.During the operation of the system, the voltage of the operating supply should be set to 15V.A maximum output voltage of 25mV should be maintained.
TC4424EPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4424EPA Applications
There are a lot of Microchip Technology TC4424EPA gate drivers applications.
- Broadcast equipment
- Motor Controls
- Head-up and Head mounted displays
- Uninterruptible Power Supplies (UPS)
- Solar power supplies
- Commercial and agricultural vehicles (CAV)
- AC-DC Inverters
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Supplies for controller area network (CAN),
- Portable Navigation Devices
- ImagePart NumberManufacturerPackage / CaseNumber of PinsChannel TypeMax Output CurrentOutput CurrentRise TimeMax Power DissipationPower DissipationView Compare
TC4424EPA
Microchip Technology8-DIP (0.300, 7.62mm)
8
Independent
3 A
3 A
35 ns
730 mW
730 mW
- TC4423CPAMicrochip Technology
8-DIP (0.300, 7.62mm)
8
Independent
3 A
3 A
35 ns
730 mW
730 mW
TC4424EPA
VS
TC4423CPA
- TC4425CPAMicrochip Technology
8-DIP (0.300, 7.62mm)
8
Independent
3 A
-
35 ns
730 mW
730 mW
TC4424EPA
VS
TC4425CPA
- TC4424CPAMicrochip Technology
8-DIP (0.300, 7.62mm)
8
Independent
3 A
3 A
35 ns
730 mW
730 mW
TC4424EPA
VS
TC4424CPA
- MIC4424CNMicrochip Technology
8-DIP (0.300, 7.62mm)
-
Independent
-
-
-
-
-
TC4424EPA
VS
MIC4424CN
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's TC4424EPA price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
