Texas Instruments CDCVF2505DR
CDCVF2505DR
Please send RFQ , we will respond immediately.
Texas Instruments CDCVF2505DR information
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 1 day ago)
Contact Plating
Gold
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Weight
75.891673mg
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Type
PLL Clock Driver
Subcategory
Clock Drivers
Packing Method
TR
Voltage - Supply
3V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Frequency
200MHz
Base Part Number
CDCVF2505
Pin Count
8
Number of Outputs
4
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
3V
Number of Circuits
1
Load Capacitance
25pF
Nominal Supply Current
5μA
Output Characteristics
3-STATE WITH SERIES RESISTOR
Input
LVTTL
Ratio - Input:Output
1:5
PLL
Yes with Bypass
Differential - Input:Output
No/No
Height
1.75mm
Length
4.9mm
Width
3.91mm
Thickness
1.58mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- PCN Assembly/Origin :
- Datasheets :
CDCVF2505DR Overview
As a clock IC, it uses the Tape & Reel (TR) package. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 8 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. The input of this clock generator is designed to be LVTTL. For a full understanding of the electronic part's performance, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There is a maximum voltage of 3.6V for this clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Based on test statistics, ambient temperature should be set at -40°C~85°C. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The related electrical components for the base part number CDCVF2505 can be found below. There is an available 8 pin on the clock generators. Electronic frequency generator can handle voltages up to 3.3V. A Clock Drivers clock generator is essentially what this device is. Clock PLL is configured with 4 output. Using a frequency of 200MHz allows frequency synthesizer to achieve high efficiencies. Depending on the load capacitance, the analog clock generator can deliver a value of 25pF. TR is an ideal package for this electronic frequency generator.
CDCVF2505DR Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF
CDCVF2505DR Applications
There are a lot of Texas Instruments CDCVF2505DR Clock Generators applications.
- Line cards used in telephone exchange
- FSK demodulators
- Laptops
- Melting
- Satellite receivers
- Clock synchronization
- Closed circuit systems
- Multi-function printers
- Reference signals to RF systems
- Signal analyzer
- ImagePart NumberManufacturerPackage / CaseNumber of PinsPLLInputNumber of OutputsSupply VoltageNumber of TerminationsOperating Supply VoltageView Compare
CDCVF2505DR
NA8-SOIC (0.154, 3.90mm Width)
8
Yes with Bypass
LVTTL
4
3.3 V
8
3.3 V
CY2305SC-1HCypress Semiconductor Corp8-SOIC (0.154, 3.90mm Width)
8
Yes
Clock
5
3.3 V
8
3.3 V
CDCVF2505DR
VS
CY2305SC-1H
23S05E-1DCG8Integrated Device Technology (IDT)SOIC
8
-
LVTTL
-
3.3 V
8
3.3 V
CDCVF2505DR
VS
23S05E-1DCG8
23S05E-1DCGIIntegrated Device Technology (IDT)SOIC
8
-
LVTTL
-
3.3 V
8
3.3 V
CDCVF2505DR
VS
23S05E-1DCGI
23S05E-1HDCGIIntegrated Device Technology (IDT)SOIC
8
-
LVTTL
5
3.3 V
8
3.3 V
CDCVF2505DR
VS
23S05E-1HDCGI
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Texas Instruments Incorporated (TI)'s CDCVF2505DR price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
Texas Instruments Incorporated (TI) was founded in 1930 and is headquartered in Dallas, Texas, USA. Haviv Ilan is the President and CEO. They design, manufacture, test and sell analog and embedded semiconductors. Industrial and automotive markets are the best markets for their products .
The company focuses on amplifiers, audio, clock and timing, data converters, die and wafer services, DLP® products, interfaces, isolation devices, logic, microcontrollers (MCUs) and processors, motor drivers, power management, radio frequency & Microwaves, Sensors, Switches & Multiplexers, Wireless Connectivity.
Their values: Trustworthy, Inclusive, Innovative, Competitive, Results-oriented
Acquisition history：
In October 1999, TI acquired power Trends
In 2000, TI acquired Burr Brown (BB) at approximately $7.6 billion.
In September 2011, TI acquired National semiconductor(NS.NSC) for US$6.5 billion.
In 2021, TI acquired an operational 300mm fabrication plant located in Lehi, Utah from Micron for $900 million.
Main application fields:
Automotive, Communications Equipment, Enterprise Systems, Industrial Applications, Aerospace and Defense, Appliances, Building Automation, Factory Automation and Control, Grid Infrastructure, Industrial Transportation (non-automotive and non-light truck), Lighting, Medical, Motor Drives, Power Delivery, Pro Audio, Video & Signage, Retail Automation & Payments, Test & Measurement, Personal Electronics.
