Maxim Integrated DS1045S-5
DS1045S-5
Please send RFQ , we will respond immediately.
Maxim Integrated DS1045S-5 information
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.295, 7.50mm Width)
Operating Temperature
0°C~70°C
Packaging
Tube
Published
1999
JESD-609 Code
e0
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Terminal Finish
Tin/Lead (Sn/Pb)
Additional Feature
TWO INDEPENDENTLY PROGRAMMABLE OUTPUTS FROM A SINGLE INPUT
Subcategory
Delay Lines
Technology
CMOS
Voltage - Supply
4.75V~5.25V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
245
Supply Voltage
5V
Reach Compliance Code
not_compliant
Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
DS1045
Function
Multiple, Programmable
Qualification Status
Not Qualified
Power Supplies
5V
Supply Voltage-Min (Vsup)
4.75V
Family
CMOS/TTL
Output Polarity
TRUE
Logic IC Type
SILICON DELAY LINE
Prop.
83 ns
Power Supply Current-Max (ICC)
35mA
Number of Taps/Steps
16
Number of Independent Delays
2
Delay to 1st Tap
9ns
Programmable Delay Line
YES
Available Total Delays
84ns
Total Delay-Nom (td)
84 ns
Tap Increment
5ns
Length
10.3mm
Width
7.5mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
- Datasheets :
- ConflictMineralStatement :
maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf
DS1045S-5 Overview
Cost-effective packaging is achieved by using Tube. In applications requiring additional insulation, the 16-SOIC (0.295, 7.50mm Width) package can be used instead. Providing reliable performance requires a voltage supply of 4.75V~5.25V. It is mounted using the technique of Surface Mount. This device has an operating temperature of 0°C~70°C. Taps and steps are configured with 16. The use of multiple related parts with the same base part number DS1045 is universally preferred for a wide variety of applications. The terminals are placed at DUAL. As a result, it is equipped with 16 terminations for unique configurations. When the device is operating, the supply voltage of 5V is provided. It uses the logic type SILICON DELAY LINE. It was developed using advanced CMOS technology. This category provides all the benefits of the subcategory Delay Lines. If the minimum supply voltage is 4.75V, it is acceptable for it to operate. There is a mounting in the way of Surface Mount. The power supplies of 5V is provided to ensure flexible operation. The CMOS/TTL family contains a significant amount of CMOS/TTL. Its TWO INDEPENDENTLY PROGRAMMABLE OUTPUTS FROM A SINGLE INPUT coupled with other specific characteristics make it suitable for a variety of applications.
DS1045S-5 Features
Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
supply type: 5V
stay resistance at CMOS/TTL
DS1045S-5 Applications
There are a lot of Maxim Integrated DS1045S-5 Delay Lines Timing ICs applications.
- LCD Televisions
- QDR/QDRII Memory Systems
- Broadband test and measurement
- Clock Synchronization
- Noise Discriminators/Pulse Qualifiers
- Digital Video Projection
- Timing Adjustments
- Synchronization of clock and data
- Network Hubs, Bridges, and Routers
- Switch Debouncing
- ImagePart NumberManufacturerPackage / CaseSupply VoltagePower SuppliesMounting TypeTerminal FormTerminal PositionMountWidthView Compare
DS1045S-5
Maxim Integrated16-SOIC (0.295, 7.50mm Width)
5 V
5 V
Surface Mount
GULL WING
DUAL
Surface Mount
7.5 mm
ST485CDRSTMicroelectronics8-SOIC (0.154, 3.90mm Width)
5 V
5 V
Surface Mount
GULL WING
DUAL
Surface Mount
4 mm
DS1045S-5
VS
ST485CDR
MC100ELT21DGON Semiconductor8-SOIC (0.154, 3.90mm Width)
5 V
5 V
Surface Mount
GULL WING
DUAL
Surface Mount
4 mm
DS1045S-5
VS
MC100ELT21DG
- AMIS30660CANH2RGON Semiconductor
8-SOIC (0.154, 3.90mm Width)
5 V
5 V
Surface Mount
GULL WING
DUAL
-
4 mm
DS1045S-5
VS
AMIS30660CANH2RG
- MC10ELT28DGON Semiconductor
8-SOIC (0.154, 3.90mm Width)
5 V
5 V
Surface Mount
GULL WING
DUAL
Surface Mount
4 mm
DS1045S-5
VS
MC10ELT28DG
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Maxim Integrated's DS1045S-5 price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
