Power Integrations LNK625DG
LNK625DG
Please send RFQ , we will respond immediately.
Power Integrations LNK625DG information
Type
Parameter
Factory Lead Time
6 Weeks
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width), 7 Leads
Surface Mount
YES
Number of Pins
8
Operating Temperature
-40°C~150°C TJ
Packaging
Tube
Published
2009
Series
LinkSwitch®-CV
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Discontinued
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
7
Terminal Finish
Matte Tin (Sn)
Power Rating
13.5W
Max Power Dissipation
13.5W
Terminal Position
DUAL
Terminal Form
GULL WING
Number of Functions
1
Supply Voltage
230V
Terminal Pitch
1.27mm
Frequency
100kHz
Pin Count
8/7
JESD-30 Code
R-PDSO-G7
Number of Outputs
3
Output Voltage
700V
Voltage
700V
Analog IC - Other Type
ANALOG CIRCUIT
Operating Supply Current
480μA
Power Dissipation
6.5W
Output Current
790mA
Output Power
8W
Topology
Flyback
Min Input Voltage
85V
Max Input Voltage
265V
Internal Switch(s)
Yes
Fault Protection
Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle
54 %
Max Supply Voltage (AC)
265V
Duty Cycle
54%
Output Isolation
Isolated
Voltage - Breakdown
725V
Min Input Voltage (AC)
85V
Max Input Voltage (AC)
265V
Min Supply Voltage (AC)
85V
Height Seated (Max)
1.75mm
Length
4.9mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
RoHS Compliant
- Datasheets :
- PCN Design/Specification :
- PCN Assembly/Origin :
LNK625DG Overview
A ac to dc converter of the package 8-SOIC (0.154, 3.90mm Width), 7 Leads contains the ac to dc converter.There is a AC/DC power converter of Tube available.Surface Mount is mounted in the way of this AC/DC converter.It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.A ANALOG CIRCUIT analog integrated circuit is used in this AC DC converter.Total terminations are 7 .There are 8 pins on the ac/dc converter.There are a total of 8/7 pins on the ac-dc converter.It is a member of LinkSwitch?-CV manufacturer family.The number of outputs to run is 3 .There is 790mA output current set.In this AC to DC transformer, the output voltage is 700V .The power AC DC is capable of high efficiency when operated at a frequency of 100kHz .In the following link, you will find the REACH SVHC standard: No SVHC .Input voltage for the AC to DC converter is available under 265V .Coverters generate 8W in terms of output power.An input voltage of less than 85V volts can be used with the AC to DC inverter.There should be no less than 85V voltage across the converter.It is possible to supply 265V voltage across the converter.At all times, this AC to DC converter should be set to 230V .An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.
LNK625DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
With 8 pins
Output Current at 790mA
LNK625DG Applications
There are a lot of Power Integrations LNK625DG AC DC Converters applications.
- Standby power supplies for VCR
- LED Driver
- Automotive Infotainment
- Home Appliance Applications
- Adapters
- Rice Cooker
- Appliances
- Replaces linear transformers
- Battery chargers for media tablets
- Adapter/Charger for Cell
- ImagePart NumberManufacturerPackage / CaseNumber of PinsNumber of OutputsOutput CurrentMin Input VoltageMin Input Voltage (AC)Max Input VoltageMax Input Voltage (AC)View Compare
LNK625DG
Power Integrations8-SOIC (0.154, 3.90mm Width), 7 Leads
8
3
790 mA
85 V
85 V
265 V
265 V
MC34063ADR2GON Semiconductor8-SOIC (0.154, 3.90mm Width)
8
1
-
-
-
-
-
LNK625DG
VS
MC34063ADR2G
- MC34063ADGON Semiconductor
8-SOIC (0.154, 3.90mm Width)
8
1
-
-
-
-
-
LNK625DG
VS
MC34063ADG
- MC33063ADR2GON Semiconductor
8-SOIC (0.154, 3.90mm Width)
8
1
-
-
-
-
-
LNK625DG
VS
MC33063ADR2G
UCC28730DNA8-SOIC (0.154, 3.90mm Width), 7 Leads
7
1
29 mA
85 V
85 V
265 V
265 V
LNK625DG
VS
UCC28730D
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Power Integrations's LNK625DG price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
