STMicroelectronics VIPER22ADIP-E
VIPER22ADIP-E
Please send RFQ , we will respond immediately.
STMicroelectronics VIPER22ADIP-E information
Type
Parameter
Factory Lead Time
20 Weeks
Lifecycle Status
ACTIVE (Last Updated: 8 months ago)
Contact Plating
Tin
Mount
Surface Mount, Through Hole
Mounting Type
Through Hole
Package / Case
8-DIP (0.300, 7.62mm)
Number of Pins
8
Weight
4.535924g
Operating Temperature
-40°C~150°C TC
Packaging
Tube
Series
VIPER™
JESD-609 Code
e3
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Subcategory
Switching Regulator or Controllers
Power Rating
20W
Max Power Dissipation
12W
Terminal Position
DUAL
Number of Functions
1
Terminal Pitch
2.54mm
Frequency
60kHz
Base Part Number
VIPER22
Pin Count
8
Output Voltage
730V
Input Voltage-Nom
18V
Number of Channels
1
Analog IC - Other Type
SWITCHING REGULATOR
Nominal Supply Current
4.5mA
Output Current
700mA
Voltage - Supply (Vcc/Vdd)
8V~38V
Max Supply Current
5mA
Output Power
12W
Topology
Flyback
Min Input Voltage
195V
Control Mode
CURRENT-MODE
Max Input Voltage
265V
Control Technique
PULSE WIDTH MODULATION
Rise Time
50ns
Fall Time (Typ)
100 ns
Switcher Configuration
SINGLE
Threshold Voltage
16V
Internal Switch(s)
Yes
Fault Protection
Current Limiting, Over Temperature, Over Voltage
Max Duty Cycle
16 %
Output Isolation
Isolated
Voltage - Start Up
14.5V
Min Input Voltage (AC)
195V
Max Input Voltage (AC)
265V
Height
2.92mm
Length
9.02mm
Width
7.11mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
VIPER22ADIP-E Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .The ac dc converter is available in Tube case.As you can see, this AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TC °C so that it can deliver its performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 8V~38V , the AC/DC converter may be used.There have been 8 terminations of this program.A ac/dc converter with 8 pins is available.The pins of the ac-dc converter total to 8 .Surface Mount, Through Hole is a suitable mounting point for the ac dc converters.It belongs to the family of VIPER? manufacturers.Search similar acdc converters based on VIPER22 family members.The ac to dc conversions are included in Switching Regulator or Controllers .We have set the output current to 700mA .As a result, its output voltage is 730V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 60kHz .In the following link, you will find the REACH SVHC standard: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .It is assumed that a coverter generates 12W as its output power.A voltage of less than 195V V can be used with the AC to DC inverter.There is a maximum current limAC to DC converter of 5mA for the supply.AC to DC power converters should be able to accept input voltages (AC) below 265V .A total of 1 channels exist.
VIPER22ADIP-E Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 700mA
With 1 channels on it
VIPER22ADIP-E Applications
There are a lot of STMicroelectronics VIPER22ADIP-E AC DC Converters applications.
- SMPS house keeping power supplies
- Adaptors for Portable Media Player
- USB type-c v1.2 chargers with optional VDM
- Digital cameras
- Battery chargers for mobile devices with touchpad display
- Standby power supplies for IR
- Auxiliary Power Supplies
- Air Conditioning
- AC/DC Adaptors/Chargers for E-books
- AC/DC LED Driver applications
- ImagePart NumberManufacturerPackage / CaseNumber of PinsNumber of TerminationsMoisture Sensitivity Level (MSL)TopologyControl TechniquePin CountSwitcher ConfigurationView Compare
VIPER22ADIP-E
STMicroelectronics8-DIP (0.300, 7.62mm)
8
8
1 (Unlimited)
Flyback
PULSE WIDTH MODULATION
8
SINGLE
- NCP1200P60GON Semiconductor
8-DIP (0.300, 7.62mm)
8
8
1 (Unlimited)
Flyback
PULSE WIDTH MODULATION
8
SINGLE
VIPER22ADIP-E
VS
NCP1200P60G
- NCP1203P40GON Semiconductor
8-DIP (0.300, 7.62mm)
8
8
1 (Unlimited)
Flyback
PULSE WIDTH MODULATION
8
SINGLE
VIPER22ADIP-E
VS
NCP1203P40G
- NCP1200P40ON Semiconductor
8-DIP (0.300, 7.62mm)
8
8
1 (Unlimited)
Flyback
PULSE WIDTH MODULATION
8
SINGLE
VIPER22ADIP-E
VS
NCP1200P40
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the STMicroelectronics's VIPER22ADIP-E price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
