Microchip Technology MCP3004-I/ST
MCP3004-I/ST
Please send RFQ , we will respond immediately.
Microchip Technology MCP3004-I/ST information
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-TSSOP (0.173, 4.40mm Width)
Number of Pins
14
Operating Temperature
-40°C~85°C
Packaging
Tube
Published
2005
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
Subcategory
Analog to Digital Converters
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.65mm
Reflow Temperature-Max (s)
40
Base Part Number
MCP3004
Pin Count
14
Output Voltage
4.1V
Number of Elements
1
Polarity
Unipolar
Power Supplies
3/5V
Configuration
MUX-S/H-ADC
Number of Channels
4
Interface
SPI, Serial
Max Supply Voltage
5.5V
Min Supply Voltage
2.7V
Nominal Supply Current
425μA
Number of Bits
10
Input Type
Pseudo-Differential, Single Ended
Architecture
SAR
Number of Inputs
2, 4
Converter Type
ADC, SUCCESSIVE APPROXIMATION
Reference Type
External
Data Interface
SPI
Resolution
1.25 B
Sampling Rate
200 ksps
Voltage - Supply, Analog
2.7V~5.5V
Voltage - Supply, Digital
2.7V~5.5V
Number of Analog In Channels
4
Sampling Rate (Per Second)
200k
Output Bit Code
BINARY
Linearity Error-Max (EL)
0.0977%
Integral Nonlinearity (INL)
1 LSB
Sample and Hold / Track and Hold
SAMPLE
Conversion Rate
200 ksps
Ratio - S/H:ADC
1:1
Analog Input Voltage-Max
5V
Signal to Noise Ratio (SNR)
200 dB
Height
1.05mm
Length
5.1mm
Width
4.5mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
- PCN Assembly/Origin :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
MCP3004-I/ST Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 14-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 14 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 4 channels.The is equipped with 14 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MCP3004 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount allows the ADC converter to be mounted.The ADC converter operates with the maximal supply voltage of 5.5V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 5V.The ADC converter operates from 3/5V power supplies.The number of channels is growing strong/weak: 4.The conversion rate of this electrical AD converter is calculated as 200 ksps.The ADC converter consists of 1 elements.The output voltage is maintain at 4.1V.
MCP3004-I/ST Features
1 Functions
14 basic kinds of terminations
14 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements
MCP3004-I/ST Applications
There are a lot of Microchip Technology MCP3004-I/ST ADC applications.
- Audio/Video devices
- Music recording
- High Speed Data Acquisition
- Communication test equipment
- Industrial Process Control
- TD-SCDMA, WiMAX
- AC motor control
- Rotary encoder
- Handheld Terminal Interface
- Smart antenna systems
- ImagePart NumberManufacturerPackage / CaseNumber of InputsNumber of PinsNumber of BitsSampling RatePolarityInterfaceIntegral Nonlinearity (INL)Min Supply VoltageSupply VoltageView Compare
MCP3004-I/ST
Microchip Technology14-TSSOP (0.173, 4.40mm Width)
2, 4
14
10
200 ksps
Unipolar
SPI, Serial
1 LSB
2.7 V
5 V
ADC128S022CIMTX/NOPBNA16-TSSOP (0.173, 4.40mm Width)
-
16
12
200 ksps
Unipolar
SPI, Serial
1 LSB
2.7 V
3 V
MCP3004-I/ST
VS
ADC128S022CIMTX/NOPB
- TLV1544IPWRNA
16-TSSOP (0.173, 4.40mm Width)
-
16
10
85 ksps
Unipolar
-
1 LSB
2.7 V
2.7 V
MCP3004-I/ST
VS
TLV1544IPWR
- TLV1544CPWRNA
16-TSSOP (0.173, 4.40mm Width)
-
16
10
85 ksps
Unipolar
-
1 LSB
2.7 V
2.7 V
MCP3004-I/ST
VS
TLV1544CPWR
- MCP3004T-I/STMicrochip Technology
14-TSSOP (0.173, 4.40mm Width)
2, 4
14
10
200 ksps
Unipolar
SPI, Serial
1 LSB
2.7 V
5 V
MCP3004-I/ST
VS
MCP3004T-I/ST
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's MCP3004-I/ST price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
