Microchip Technology AT24C256C-SSHL-T
AT24C256C-SSHL-T
Please send RFQ , we will respond immediately.
Microchip Technology AT24C256C-SSHL-T information
Type
Parameter
Factory Lead Time
7 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2005
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Technology
CMOS
Voltage - Supply
1.7V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
1.27mm
Base Part Number
AT24C256C
Voltage
5V
Interface
2-Wire, I2C
Memory Size
256Kb 32K x 8
Nominal Supply Current
3mA
Memory Type
Non-Volatile
Clock Frequency
1MHz
Access Time
550ns
Memory Format
EEPROM
Memory Interface
I2C
Memory Width
8
Write Cycle Time - Word, Page
5ms
Density
256 kb
Standby Current-Max
0.000001A
Parallel/Serial
SERIAL
Serial Bus Type
I2C
Endurance
1000000 Write/Erase Cycles
Write Cycle Time-Max (tWC)
5ms
Data Retention Time-Min
40
Write Protection
HARDWARE/SOFTWARE
I2C Control Byte
1010DDDR
Height
1.75mm
Length
4.9mm
Width
3.9mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Assembly/Origin :
- PCN Packaging :
- PCN Part Number :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
AT24C256C-SSHL-T Overview
As far as memory types are concerned, Non-Volatile is considered to be its memory type. It comes in a Tape & Reel (TR). The 8-SOIC (0.154, 3.90mm Width) case contains it. Memory size on the chip is 256Kb 32K x 8. This device uses takes advantage of the EEPROM format. With an extended designed operating temperature of -40°C~85°C TA, this device is capable of lots of demanding applications. A supply voltage of 1.7V~5.5V can be applied to it. It is recommended that the mounting type be Surface Mount. As you can see from the diagram, the chip is planted with 8 terminations. As many as 1 functions are supported for comprehensive working. In order to operate this memory device, it must be supplied with 2.5V of power. It has a clock frequency of 1MHz. As the base part number for the device, AT24C256C is frequently used to select similar items. An 8-pin package is used to package this memory device. Using Surface Mount mounting, this chip offers straightforward and high-efficiency mounting. In terms of its nominal supply current, this memory component is rated at 3mA. By integrating this memory with a I2C-type serial bus, data can be carried and transferred to the CPU easily. It should be noted that the chip works well at voltages greater than 5V volts.
AT24C256C-SSHL-T Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
AT24C256C-SSHL-T Applications
There are a lot of Microchip Technology AT24C256C-SSHL-T Memory applications.
- mainframes
- servers
- Camcorders
- hard disk drive (HDD)
- personal digital assistants
- networking
- graphics card
- cell phones
- workstations,
- eSRAM
- ImagePart NumberManufacturerPackage / CaseNumber of PinsDensityAccess TimeInterfaceSupply VoltageNumber of TerminationsTerminal PitchView Compare
AT24C256C-SSHL-T
Microchip Technology8-SOIC (0.154, 3.90mm Width)
8
256 kb
550ns
2-Wire, I2C
2.5 V
8
1.27 mm
M24256-DFMN6TPSTMicroelectronics8-SOIC (0.154, 3.90mm Width)
8
256 kb
450ns
2-Wire, I2C, Serial
1.8 V
8
1.27 mm
AT24C256C-SSHL-T
VS
M24256-DFMN6TP
24FC256-I/SNMicrochip Technology8-SOIC (0.154, 3.90mm Width)
8
256 kb
400ns
I2C, Serial
-
8
1.27 mm
AT24C256C-SSHL-T
VS
24FC256-I/SN
24FC256T-I/SMMicrochip Technology8-SOIC (0.209, 5.30mm Width)
8
256 kb
400ns
I2C, Serial
-
8
1.27 mm
AT24C256C-SSHL-T
VS
24FC256T-I/SM
- M24256-DRMN3TP/KSTMicroelectronics
8-SOIC (0.154, 3.90mm Width)
8
256 kb
450ns
2-Wire, I2C, Serial
2.5 V
8
1.27 mm
AT24C256C-SSHL-T
VS
M24256-DRMN3TP/K
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's AT24C256C-SSHL-T price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
