Microchip Technology AT24C02C-STUM-T
AT24C02C-STUM-T
Please send RFQ , we will respond immediately.
Microchip Technology AT24C02C-STUM-T information
Type
Parameter
Factory Lead Time
11 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
SOT-23-5 Thin, TSOT-23-5
Number of Pins
3
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2005
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
5
Terminal Finish
Matte Tin (Sn) - annealed
Technology
CMOS
Voltage - Supply
1.7V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
0.95mm
Reflow Temperature-Max (s)
40
Base Part Number
AT24C02
JESD-30 Code
R-PDSO-G5
Supply Voltage-Max (Vsup)
5.5V
Supply Voltage-Min (Vsup)
1.7V
Interface
2-Wire, I2C, Serial
Memory Size
2Kb 256 x 8
Nominal Supply Current
3mA
Memory Type
Non-Volatile
Clock Frequency
1MHz
Access Time
550ns
Memory Format
EEPROM
Memory Interface
I2C
Organization
256X8
Memory Width
8
Write Cycle Time - Word, Page
5ms
Density
2 kb
Serial Bus Type
I2C
Write Cycle Time-Max (tWC)
5ms
Height Seated (Max)
1mm
Length
2.9mm
Width
1.6mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
- Datasheets :
- PCN Design/Specification :
- PCN Assembly/Origin :
- PCN Packaging :
- PCN Part Number :
- PCN Part Status Change :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
AT24C02C-STUM-T Overview
As far as its memory type goes, it falls into the Non-Volatile category. It is supplied votage within Tape & Reel (TR). Embedded in the SOT-23-5 Thin, TSOT-23-5 case, memory ics is a single file. On the chip, there is an 2Kb 256 x 8 memory, which is the size of the chip's memory. In this device, the memory is of the EEPROM-format, which is a popular format in the mainstream computing sector. The device's extended operating temperature range of -40°C~85°C TA makes it ideal for many demanding applications. The supply voltage can be up to 1.7V~5.5V. There is a recommendation that Surface Mount mounting type should be used for this product. There are 5 terminations on the chip. The comprehensive working procedure of this part involves 1 functions. In order to function properly, this ic memory chip should be powered by a voltage of 2.5V. During the rotation of the clock, the ic memory chip is set as 1MHz. Similar parts are frequently selected using the ic memory chip's base part number, AT24C02. In this ic memory chip, there is an 3-pin package that encloses the device. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 3mA for its nominal supply current when it comes to the memory component. The I2C-type serial bus this memory integrates with is helpful for transferring data to the CPU.
AT24C02C-STUM-T Features
Package / Case: SOT-23-5 Thin, TSOT-23-5
3 Pins
AT24C02C-STUM-T Applications
There are a lot of Microchip Technology AT24C02C-STUM-T Memory applications.
- networks
- graphics card
- telecommunications
- networking
- personal digital assistants
- Camcorders
- eSRAM
- multimedia computers
- DVD disk buffer
- personal computers
- ImagePart NumberManufacturerPackage / CaseNumber of PinsDensityAccess TimeInterfaceSupply VoltageWrite Cycle Time - Word, PageTerminal PitchView Compare
AT24C02C-STUM-T
Microchip TechnologySOT-23-5 Thin, TSOT-23-5
3
2 kb
550ns
2-Wire, I2C, Serial
2.5 V
5ms
0.95 mm
11AA020T-I/TTMicrochip TechnologyTO-236-3, SC-59, SOT-23-3
3
2 kb
-
Serial
5 V
5ms
0.95 mm
AT24C02C-STUM-T
VS
11AA020T-I/TT
- 11AA160T-I/TTMicrochip Technology
TO-236-3, SC-59, SOT-23-3
3
16 kb
-
Serial
5 V
5ms
0.95 mm
AT24C02C-STUM-T
VS
11AA160T-I/TT
- 11LC010T-I/TTMicrochip Technology
TO-236-3, SC-59, SOT-23-3
3
1 kb
100 ns
Serial
5 V
5ms
0.95 mm
AT24C02C-STUM-T
VS
11LC010T-I/TT
- 11AA010T-I/TTMicrochip Technology
TO-236-3, SC-59, SOT-23-3
3
1 kb
-
Serial
5 V
5ms
0.95 mm
AT24C02C-STUM-T
VS
11AA010T-I/TT
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's AT24C02C-STUM-T price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
