Maxim Integrated MAX3485ESA+T
MAX3485ESA+T
Please send RFQ , we will respond immediately.
Maxim Integrated MAX3485ESA+T information
Type
Parameter
Factory Lead Time
6 Weeks
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
Published
1995
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Type
Transceiver
Terminal Finish
Matte Tin (Sn)
HTS Code
8542.39.00.01
Subcategory
Line Driver or Receivers
Technology
CMOS
Voltage - Supply
3V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
1.27mm
Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
MAX3485
Pin Count
8
JESD-30 Code
R-PDSO-G8
Qualification Status
Not Qualified
Power Supplies
3.3V
Supply Current-Max
2.2mA
Data Rate
10Mbps
Output Characteristics
3-STATE
Differential Output
YES
Output Polarity
COMPLEMENTARY
Protocol
RS422, RS485
Input Characteristics
DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers
1/1
Driver Number of Bits
1
Receiver Number of Bits
1
Duplex
Half
Receiver Hysteresis
50mV
Interface Standard
EIA-422; EIA-485
Receive Delay-Max
90 ns
Transmit Delay-Max
35 ns
Output Low Current-Max
0.0025A
Out Swing-Min
1.5 V
High Level Input Current-Max
0.000002A
Height Seated (Max)
1.75mm
Length
4.9mm
Width
3.9mm
RoHS Status
ROHS3 Compliant
- Datasheets :
- Application Notes :
- TechnicalDrawing :
- ConflictMineralStatement :
maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf
MAX3485ESA+T Overview
LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.In the Tape & Reel (TR) package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver consumes 3V~3.6V for its power supplyAt any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.This transceiver is packaged with 8 market standard pinoutsThe base part number MAX3485 identifies the product type, temperature, package, etc., so you can search for more variants by using it.Using this ic receiver, you were able to achieve a resolution of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.This driver IC is designed to operate from a 3.3V power supply.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 2.2mA of input current.
MAX3485ESA+T Features
Tape & Reel (TR) package
8 pin count
3.3V power supply
MAX3485ESA+T Applications
There are a lot of Maxim Integrated MAX3485ESA+T Drivers/Receivers/Transceivers applications.
- Shortwave receiver
- Fiber optic cable connection network
- Precision engineering measurement
- Aircraft navigation
- Carrier phase observations
- Cordless telephone
- Switches
- Wireless access points
- Changeing the frequency from IF to RF
- Gigabit Ethernet
- ImagePart NumberManufacturerPackage / CaseDriver Number of BitsReceiver Number of BitsData RateSupply VoltageTerminal PositionDifferential OutputView Compare
MAX3485ESA+T
Maxim Integrated8-SOIC (0.154, 3.90mm Width)
1
1
10Mbps
3.3 V
DUAL
YES
ADM3490EARZ-REEL7Analog Devices Inc.8-SOIC (0.154, 3.90mm Width)
1
1
10Mbps
3.3 V
DUAL
YES
MAX3485ESA+T
VS
ADM3490EARZ-REEL7
- ADM3485EARZAnalog Devices Inc.
8-SOIC (0.154, 3.90mm Width)
1
1
10Mbps
3.3 V
DUAL
YES
MAX3485ESA+T
VS
ADM3485EARZ
- ADM3490EARZAnalog Devices Inc.
8-SOIC (0.154, 3.90mm Width)
1
1
10Mbps
3.3 V
DUAL
YES
MAX3485ESA+T
VS
ADM3490EARZ
ISL3152EIBZIntersil (Renesas Electronics America)SOIC
1
1
12 Mbps
5 V
DUAL
YES
MAX3485ESA+T
VS
ISL3152EIBZ
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Maxim Integrated's MAX3485ESA+T price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
