Rochester Electronics, LLC DS21610SN+
DS21610SN+
Please send RFQ , we will respond immediately.
Rochester Electronics, LLC DS21610SN+ information
Type
Parameter
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.295, 7.50mm Width)
Surface Mount
YES
Operating Temperature
-40°C~85°C
Packaging
Tube
JESD-609 Code
e0
Pbfree Code
no
Part Status
Last Time Buy
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Type
Clock Rate Adapter
Terminal Finish
TIN LEAD
Additional Feature
ALSO OPERATES AT 5V SUPPLY
Voltage - Supply
3.135V~5.25V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
245
Number of Functions
1
Supply Voltage
3.3V
Reach Compliance Code
unknown
Reflow Temperature-Max (s)
NOT SPECIFIED
Pin Count
16
Qualification Status
COMMERCIAL
Supply Voltage-Max (Vsup)
3.465V
Number of Circuits
1
Frequency (Max)
8.192MHz
Input
Clock
Ratio - Input:Output
1:2
PLL
Yes
Differential - Input:Output
No/No
Divider/Multiplier
Yes/No
Number of True Outputs
2
Height Seated (Max)
2.65mm
Width
7.5mm
RoHS Status
ROHS3 Compliant
- Datasheets :
DS21610SN+ Overview
It is packaged using the Tube method since it is a clock IC. The 16-SOIC (0.295, 7.50mm Width) package embeds this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 245. 16 terminations can be found in frequency synthesizer. Clock generator ics require a voltage of 3.3V. This Clock PLL will be fed by Clock as its input. 1 circuits are implemented to access the electronic component's full performance. RF synthesizers based on this clock provide frequencies up to 8.192MHz maximum. This component can be conveniently installed on the panel thanks to the Surface Mount. Approximately 3.465V is the maximum supply voltage needed by this time clock generator. In terms of supply voltage, RF synthesizer works with 3.135V~5.25V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. Clock Rate Adapter is the type of electrical part that this component is classified as. It is a 16-bit IC that is designed for microprocessors specifically. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 5V SUPPLY. There are 2 pins that are configured to enable high true output on this analog clock generator.
DS21610SN+ Features
Available in the 16-SOIC (0.295, 7.50mm Width)
Supply voltage of 3.3V
2 true outputs
DS21610SN+ Applications
There are a lot of Rochester Electronics, LLC DS21610SN+ Clock Generators applications.
- Quenching?
- Laptops
- Closed circuit systems
- GPS systems
- Antenna automatic tracking
- Automatic control system test
- Modems
- Precision auxiliary angle deflection measurement
- Multiplexing communication
- CB radios
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Rochester Electronics's DS21610SN+ price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
