Rochester Electronics, LLC ASM3P2779AF-06OR
ASM3P2779AF-06OR
Please send RFQ , we will respond immediately.
Rochester Electronics, LLC ASM3P2779AF-06OR information
Type
Parameter
Mounting Type
Surface Mount
Package / Case
SOT-23-6 Thin, TSOT-23-6
Surface Mount
YES
Operating Temperature
0°C~70°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
6
Type
Frequency Modulator, Spread Spectrum Clock Generator
Terminal Finish
MATTE TIN
Additional Feature
CAN ALSO OPERATES AT 3.3V SUPPLY
Voltage - Supply
2.375V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Supply Voltage
2.5V
Terminal Pitch
0.95mm
Reach Compliance Code
unknown
Reflow Temperature-Max (s)
40
Output
CMOS
Pin Count
6
JESD-30 Code
R-PDSO-G6
Qualification Status
COMMERCIAL
Number of Circuits
1
Frequency (Max)
30MHz
Input
Crystal
Ratio - Input:Output
1:1
Primary Clock/Crystal Frequency-Nom
30MHz
PLL
Yes
Differential - Input:Output
No/No
Divider/Multiplier
Yes/No
Length
2.9mm
RoHS Status
ROHS3 Compliant
- Datasheets :
ASM3P2779AF-06OR Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. This clock generator is embedded in the SOT-23-6 Thin, TSOT-23-6 package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 6 terminations in this file. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. There is a maximum frequency of 30MHz Max with this clock-based frequency generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.375V~3.6V provided with this RF synthesizer. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. CMOS is designed for clock generator's output. Frequency Modulator, Spread Spectrum Clock Generator is the type of electrical part that this component is classified as. In particular, this clock PLL is designed to be used with microprocessors. This clock PLL features CAN ALSO OPERATES AT 3.3V SUPPLY for better clock signal output.
ASM3P2779AF-06OR Features
Available in the SOT-23-6 Thin, TSOT-23-6
Supply voltage of 2.5V
ASM3P2779AF-06OR Applications
There are a lot of Rochester Electronics, LLC ASM3P2779AF-06OR Clock Generators applications.
- Microwave backhaul IF
- Quenching?
- Clock generation systems
- Bluetooth receivers
- Clock signals to the high-speed Digital RF circuits
- Automatic control
- Modems
- Instrument
- FPGA and processor clocks
- Mechanical devices
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Rochester Electronics's ASM3P2779AF-06OR price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
