Rochester Electronics, LLC CY25811ZXCT
CY25811ZXCT
Please send RFQ , we will respond immediately.
Rochester Electronics, LLC CY25811ZXCT information
Type
Parameter
Mounting Type
Surface Mount
Package / Case
8-TSSOP (0.173, 4.40mm Width)
Surface Mount
YES
Operating Temperature
0°C~70°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
Type
Clock/Frequency Synthesizer, Frequency Modulator, Spread Spectrum Clock Generator
Terminal Finish
MATTE TIN
Voltage - Supply
2.97V~3.63V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Reach Compliance Code
unknown
Reflow Temperature-Max (s)
20
Output
Clock
Pin Count
8
JESD-30 Code
R-PDSO-G8
Qualification Status
COMMERCIAL
Number of Circuits
1
Frequency (Max)
32MHz
Input
Clock, Crystal, Resonator
Ratio - Input:Output
1:1
Primary Clock/Crystal Frequency-Nom
32MHz
PLL
Yes
Differential - Input:Output
No/No
Divider/Multiplier
Yes/Yes
Length
4.4mm
Width
3mm
RoHS Status
ROHS3 Compliant
- Datasheets :
CY25811ZXCT Overview
Clock generator is packaged in the way of Tape & Reel (TR). Clock PLL is embedded in the 8-TSSOP (0.173, 4.40mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. This time clock generator should be voltaged at 3.3V. This clock generator receives its inputs from Clock, Crystal, Resonator, which is designed to be the clock source. It is possible to access the full performance of the electrical part by implementing 1 circuits. Providing a maximum frequency of 32MHz, this clock-based RF synthesizer is suitable for a variety of applications. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. There are 2.97V~3.63V available for use with this clock PLL. The temperature should be set at 0°C~70°C to ensure reliable performance. Clock is designed for clock generator's output. This electronic component can be classified into Clock/Frequency Synthesizer, Frequency Modulator, Spread Spectrum Clock Generator. The clock-generating IC is a 8-bit device designed specifically for microprocessors.
CY25811ZXCT Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
CY25811ZXCT Applications
There are a lot of Rochester Electronics, LLC CY25811ZXCT Clock Generators applications.
- Notebooks
- Clock recovery
- 1 Gigabit Ethernet
- High-speed communication applications
- Simple clock clean-up circuits
- GPS systems
- High-speed optical transport network (OTN)
- Smartphones
- High-frequency induction heating
- DVD add-on cards for multimedia PCs
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Rochester Electronics's CY25811ZXCT price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
