Microchip Technology MCP1702T-3002E/CB
MCP1702T-3002E/CB
Please send RFQ , we will respond immediately.
Microchip Technology MCP1702T-3002E/CB information
Type
Parameter
Factory Lead Time
10 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
TO-236-3, SC-59, SOT-23-3
Number of Pins
3
Operating Temperature
-40°C~125°C
Packaging
Tape & Reel (TR)
Published
2007
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
3
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
Subcategory
Other Regulators
Packing Method
TAPE AND REEL
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Terminal Pitch
0.95mm
Reflow Temperature-Max (s)
40
Base Part Number
MCP1702
Pin Count
3
Number of Outputs
1
Voltage - Input (Max)
13.2V
Output Voltage
3V
Output Type
Fixed
Max Output Current
250mA
Nominal Supply Current
5μA
Output Configuration
Positive
Power Dissipation
253mW
Quiescent Current
5μA
Accuracy
2 %
Output Voltage 1
3V
Number of Regulators
1
Min Input Voltage
2.7V
Protection Features
Over Current, Over Temperature, Short Circuit
Voltage Dropout (Max)
0.975V @ 250mA
PSRR
44dB (100Hz)
Dropout Voltage
625mV
Dropout Voltage1-Nom
0.25V
Min Output Voltage
3V
Voltage Tolerance-Max
3%
Nominal Output Voltage
3V
Input Bias Current
2μA
Output Voltage Accuracy
2 %
Height
1.2954mm
Length
3.0988mm
Width
1.8034mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Assembly/Origin :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
MCP1702T-3002E/CB Overview
This Voltage Regulator IC comes inTape & Reel (TR) packaging. In order to package the IC voltage regulator, a TO-236-3, SC-59, SOT-23-3 case is used. Basically, the voltage regulator chip is made up of 3 terminations. Fixed is the output type of the Voltage Regulator IC. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The Voltage Regulated IC operates at a temperature of -40°C~125°C degrees, which is its operating temperature. There is one output function configured for this voltage regulator IC, and that is Positive. There are 3 pins in total on this board. This IC regulator has a total of 1 outputs, which ensures a rapid, adequate performance when in use. There is a dropout voltage of 10 volts on this IC regulator. A 3-pin is present on the chip. FYI, the basic part number for this IC regulator is MCP1702. The component shown here is a typical Other Regulators component. There is a TAPE AND REEL way of packing the IC voltage regulators in the box. In order to meet the operation requirements, its maximal output current reaches 250mA. It operates in the 5μA Quiescent Current state.
MCP1702T-3002E/CB Features
625mV dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing
MCP1702T-3002E/CB Applications
There are a lot of Microchip Technology MCP1702T-3002E/CB Linear Voltage Regulators applications.
- Post DC-DC regulation
- Main inverter
- Production line
- VCO (Voltage-Controlled Oscillator)
- Game machines
- HVAC (Heating, Ventilation, and Air Conditioning)
- Video equipment
- Op-amps
- HMI (Human-Machine Interface)
- Car lighting
- ImagePart NumberManufacturerPackage / CaseNumber of PinsNumber of OutputsMax Output CurrentMin Input VoltageVoltage - Input (Max)Min Output VoltageNominal Output VoltageOutput VoltageAccuracyView Compare
MCP1702T-3002E/CB
Microchip TechnologyTO-236-3, SC-59, SOT-23-3
3
1
250 mA
2.7 V
13.2V
3 V
3 V
3 V
2 %
- MCP1703T-2502E/CBMicrochip Technology
TO-236-3, SC-59, SOT-23-3
3
1
250 mA
2.7 V
16V
2.5 V
2.5 V
2.5 V
2 %
MCP1702T-3002E/CB
VS
MCP1703T-2502E/CB
- MCP1703T-3302E/CBMicrochip Technology
TO-236-3, SC-59, SOT-23-3
3
1
250 mA
2.7 V
-
3.3 V
3.3 V
3.3 V
2 %
MCP1702T-3002E/CB
VS
MCP1703T-3302E/CB
- MCP1703T-3002E/CBMicrochip Technology
TO-236-3, SC-59, SOT-23-3
3
1
250 mA
2.7 V
-
3 V
3 V
3 V
2 %
MCP1702T-3002E/CB
VS
MCP1703T-3002E/CB
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's MCP1702T-3002E/CB price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
