Integrated Device Technology (IDT) 5V49EE502NLGI
5V49EE502NLGI
Please send RFQ , we will respond immediately.
Integrated Device Technology (IDT) 5V49EE502NLGI information
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
QFN
Number of Pins
24
Published
2006
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3
Number of Terminations
24
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Terminal Position
QUAD
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Reflow Temperature-Max (s)
NOT SPECIFIED
Pin Count
24
Number of Outputs
6
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
I2C
Number of Circuits
1
Max Supply Voltage
3.465V
Min Supply Voltage
3.135V
Operating Supply Current
68mA
Frequency (Max)
50MHz
Family
5V
Output Characteristics
3-STATE
Input
Crystal
Logic IC Type
PLL BASED CLOCK DRIVER
fmax-Min
500 MHz
Same Edge Skew-Max (tskwd)
0.075 ns
Max Junction Temperature (Tj)
150°C
Ambient Temperature Range High
85°C
Height
1mm
Length
4mm
Width
4mm
Thickness
900μm
RoHS Status
RoHS Compliant
Lead Free
Lead Free
- Datasheets :
5V49EE502NLGI Overview
The QFN package includes this clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. In it, there are 24 terminations to be found. This electronic frequency generator requires a voltage of 3.3V. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. Providing a maximum frequency of 50MHz, this clock-based RF synthesizer is suitable for a variety of applications. It is a 24-bit clock PLL designed specifically for microprocessors. There are a number of 24 pins that are available on the frequency synthesizers. In addition to having an impressive low-temperature performance, this clock device can perform -40°C operations simultaneously. The operating temperature should be lower than 85°C. Supply voltage 3.3V is what clock generator can handle. Clock PLL has 6 signal outputs to maximi6e output frequency. At maximum 0.075 ns, this analog clock generator has low timing skew. The 5V family of parts can be used to find electric parts that are similar to each other. To supply this clock PLL, a voltage higher than 3.465V is unacceptable. The lowest limit of supply voltage for this RF synthesizer is 3.135V. Logic circuits that use PLL BASED CLOCK DRIVER logic are composed of this analog clock generator. A supply current of 68mA is required to fully operate clock PLL.
5V49EE502NLGI Features
Available in the QFN
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5V49EE502NLGI Applications
There are a lot of Integrated Device Technology (IDT) 5V49EE502NLGI Clock Generators applications.
- FSK demodulators
- Bit synchronization
- Microwave radio
- GPS systems
- Coherent carrier tracking
- Electronic equipment
- Set-top boxes
- Multi-function printers
- Small signal recovery
- Integrated phase noise in aerospace systems
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Integrated Device Technology (IDT) 's 5V49EE502NLGI price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
