Integrated Device Technology (IDT) 23S09T-1DCG
23S09T-1DCG
Please send RFQ , we will respond immediately.
Integrated Device Technology (IDT) 23S09T-1DCG information
Type
Parameter
Factory Lead Time
7 Weeks
Contact Plating
Tin
Mount
Surface Mount
Package / Case
SOIC N
Number of Pins
16
Packaging
Rail/Tube
Published
2009
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3
Number of Terminations
16
ECCN Code
EAR99
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Reflow Temperature-Max (s)
30
Pin Count
16
Operating Supply Voltage
2.5V
Temperature Grade
COMMERCIAL
Number of Circuits
1
Max Supply Voltage
2.7V
Min Supply Voltage
2.3V
Nominal Supply Current
32mA
Frequency (Max)
133MHz
Family
23S
Output Characteristics
3-STATE
Input
LVTTL
Logic IC Type
PLL BASED CLOCK DRIVER
Same Edge Skew-Max (tskwd)
0.25 ns
Number of True Outputs
8
Length
9.9mm
Width
3.9mm
Thickness
1.5mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
- Datasheets :
23S09T-1DCG Overview
As a clock IC, it is packaged by the Rail/Tube method. Clock PLL is embedded in the SOIC N package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. It contains 16 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. The input of this clock generator is designed to be LVTTL. A total of 1 circuits are implemented to access the full performance of the electrical part. Providing a maximum frequency of 133MHz, this clock-based RF synthesizer is suitable for a variety of applications. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. There are 16 pins that are available on the frequency generator. Despite its low operating temperature, this clock generator has 0°C operations. This RF synthesizer can last with attenuated performance at 70°C. Supply voltage 2.5V is what time clock generator can handle. The timing skew of this frequency synthesizer is low at 0.25 nsmax. A analog clock generator with 8 true output enable pins is configured for this application. By searching for the 23S family, it is possible to find similar electrical components. There is no point in supplying this frequency generator with a voltage higher than 2.7V. Powered by 2.3V, this clock generator has the lowest supply voltage limit. Electronic frequency generator is mainly used for constructing PLL BASED CLOCK DRIVER logic circuits.
23S09T-1DCG Features
Available in the SOIC N
Supply voltage of 3.3V
Operating supply voltage of 2.5V
8 true outputs
23S09T-1DCG Applications
There are a lot of Integrated Device Technology (IDT) 23S09T-1DCG Clock Generators applications.
- Vector network analyzers (VNA)
- Medical equipment
- Test and instrumentation equipment
- Cellular/4G
- Frequency shifting decodes
- Televisions
- GPS systems
- Media broadcast servers
- Telecommunication systems
- Wi-Fi routers
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Integrated Device Technology (IDT) 's 23S09T-1DCG price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
