Integrated Device Technology (IDT) 2308-2DCGI
2308-2DCGI
Please send RFQ , we will respond immediately.
Integrated Device Technology (IDT) 2308-2DCGI information
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
SOIC
Number of Pins
16
Published
2012
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3
Number of Terminations
16
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Subcategory
Clock Drivers
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Reflow Temperature-Max (s)
30
Pin Count
16
Number of Outputs
8
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Number of Circuits
1
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Operating Supply Current
45mA
Nominal Supply Current
45mA
Frequency (Max)
133.3MHz
Output Characteristics
3-STATE
Input
LVTTL
Logic IC Type
PLL BASED CLOCK DRIVER
Same Edge Skew-Max (tskwd)
0.2 ns
Length
9.9mm
Width
3.9mm
Thickness
1.5mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
- Datasheets :
2308-2DCGI Overview
As part of the SOIC package, this clock generator is embedded. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. As you can see, it consists of 16 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. For a full understanding of the electronic part's performance, 1 circuits are implemented. There is a maximum frequency of 133.3MHz Max with this clock-based frequency generator. In particular, this clock PLL is designed to be used with microprocessors. A 16 pin is available on the PLL. Featuring an impressive low-temperature operating performance and -40°C functions, this clock generator is sure to impress. The RF synthesizer can still operate at 85°C with attenuated performance. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. The device is usually classified as a type of Clock Drivers device. The output frequency can be amplified as high as possible with its 8 signal outputs. There is a low timing skew at 0.2 nsmax with this RF synthesizer. A voltage above 3.6V will not provide enough power to this frequency generator. This RF synthesizer can handle voltages as low as 3V. The logic IC PLL clock adopts is PLL BASED CLOCK DRIVER. This time clock generator requires a supply current of 45mA in order to operate properly.
2308-2DCGI Features
Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
2308-2DCGI Applications
There are a lot of Integrated Device Technology (IDT) 2308-2DCGI Clock Generators applications.
- Signal generator
- Motor speed controls
- Pulsed digital systems
- Electronic countermeasures
- Cell phones
- CPUs
- DVD add-on cards for multimedia PCs
- Digital HDTV systems
- Televisions
- Wireless handsets
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Integrated Device Technology (IDT) 's 2308-2DCGI price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
