Integrated Device Technology (IDT) 74FCT388915TBJG8
74FCT388915TBJG8
Please send RFQ , we will respond immediately.
Integrated Device Technology (IDT) 74FCT388915TBJG8 information
Type
Parameter
Contact Plating
Tin
Mount
Surface Mount
Package / Case
LCC
Number of Pins
28
Packaging
Tape & Reel (TR)
Published
2005
JESD-609 Code
e3
Pbfree Code
yes
Moisture Sensitivity Level (MSL)
1
Number of Terminations
28
ECCN Code
EAR99
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Subcategory
Clock Drivers
Technology
CMOS
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Reflow Temperature-Max (s)
30
Pin Count
28
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Temperature Grade
COMMERCIAL
Supply Voltage-Min (Vsup)
3V
Number of Circuits
1
Frequency (Max)
70MHz
Family
FCT
Output Characteristics
3-STATE
Input
LVTTL
Logic IC Type
PLL BASED CLOCK DRIVER
Max I(ol)
0.032 A
Same Edge Skew-Max (tskwd)
0.8 ns
Number of True Outputs
7
Number of Inverted Outputs
1
Height Seated (Max)
4.572mm
RoHS Status
RoHS Compliant
- Datasheets :
74FCT388915TBJG8 Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. In the LCC package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains a total of 28 terminations within RF synthesizer. This clock generator ic should receive a voltage of 3.3V. The input of this clock generator is designed to be LVTTL. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 70MHz is available. Clock generators can take up to 3.6V of power as a maximum supply voltageFor safety reasons, this frequency generator's supply voltage should remain above 3V. Clock PLL is equipped with 28 pin count. PLL is designed with 28 pins. There are 0°C operations that can be performed on this clock generator, which has impressive low-temperature performance. It is possible for the clock generator ic to work at 70°C with a reduced performance. The maximum supply voltage that clock generator can handle is 3.3V. Clock Drivers-type frequency generators are usually classified as this type. At 0.8 ns Max, this analog clock generator exhibits low timing skew. A analog clock generator with 7 true output enable pins is configured for this application. When searching for parts of the FCT family, similar frequency generators will be found. A PLL BASED CLOCK DRIVER logic circuit uses this time clock generator as its main component.
74FCT388915TBJG8 Features
Available in the LCC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
7 true outputs
74FCT388915TBJG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT388915TBJG8 Clock Generators applications.
- Test and instrumentation equipment
- Jitter reduction
- Integrated phase noise in aerospace systems
- Digital logic circuits
- Pagers
- Picocells, femtocells and small cells
- MRI
- Time to digital converters
- Small signal recovery
- Microprocessor clock multipliers
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInputFrequency (Max)Supply VoltageTechnology[email protected] Reflow Temperature-Max (s)Number of CircuitsView Compare
74FCT388915TBJG8
Integrated Device Technology (IDT)LCC
28
LVTTL
70 MHz
3.3 V
CMOS
30
1
NBC12430FNON Semiconductor28-LCC (J-Lead)
28
Crystal
800MHz
3.3 V
CMOS
30
1
74FCT388915TBJG8
VS
NBC12430FN
- NBC12439FNON Semiconductor
28-LCC (J-Lead)
28
Crystal
800MHz
3.3 V
CMOS
30
1
74FCT388915TBJG8
VS
NBC12439FN
MPC9230EIR2Integrated Device Technology (IDT)PLCC
28
Crystal
750 MHz
3.3 V
CMOS
30
1
74FCT388915TBJG8
VS
MPC9230EIR2
MPC9239FNIntegrated Device Technology (IDT)PLCC
28
Crystal
900 MHz
3.3 V
CMOS
30
1
74FCT388915TBJG8
VS
MPC9239FN
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Integrated Device Technology (IDT) 's 74FCT388915TBJG8 price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
