Diodes Incorporated 1N4148W-7-F
1N4148W-7-F
Please send RFQ , we will respond immediately.
Diodes Incorporated 1N4148W-7-F information
Type
Parameter
Factory Lead Time
17 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
SOD-123
Number of Pins
2
Weight
10.007382mg
Diode Element Material
SILICON
Packaging
Tape & Reel (TR)
Published
2012
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
2
ECCN Code
EAR99
Max Operating Temperature
150°C
Min Operating Temperature
-65°C
Additional Feature
HIGH RELIABILITY
HTS Code
8541.10.00.70
Capacitance
2pF
Subcategory
Rectifier Diodes
Power Rating
400mW
Voltage - Rated DC
75V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Current Rating
150mA
Reflow Temperature-Max (s)
40
Base Part Number
1N4148W
Pin Count
2
Number of Elements
1
Voltage
100V
Element Configuration
Single
Speed
Small Signal =< 200mA (Io), Any Speed
Current
15A
Diode Type
Standard
Current - Reverse Leakage @ Vr
1μA @ 75V
Power Dissipation
400mW
Output Current
150mA
Voltage - Forward (Vf) (Max) @ If
1.25V @ 150mA
Forward Current
300mA
Operating Temperature - Junction
-65°C~150°C
Max Surge Current
2A
Current - Average Rectified (Io)
300mA DC
Forward Voltage
1.25V
Max Reverse Voltage (DC)
100V
Average Rectified Current
300mA
Reverse Recovery Time
4 ns
Peak Reverse Current
1μA
Max Repetitive Reverse Voltage (Vrrm)
100V
Capacitance @ Vr, F
2pF @ 0V 1MHz
Peak Non-Repetitive Surge Current
2A
Max Forward Surge Current (Ifsm)
2A
Recovery Time
4 ns
Height
1.25mm
Length
2.85mm
Width
1.7mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
diodesincorporated-desd5v0s1ba7-environmentalinformation-9032.pdf
- PCN Design/Specification :
- PCN Assembly/Origin :
1N4148W-7-F Overview
The power rating is 400mW, which is usually expressed in watts or volt-amperes.As a result, this device has a rectified current of 300mA volts on average.An unwanted side effect of this electronic or electrical device is that it produces 400mW heat.A forward current of 300mA is allowed.As you can see, the fuse's current rating is 150mA, which means that it can carry a maximum current for an indefinite period without losing too much performance.There can be no surge current above 2A.Phase diode rectifier is possible for a capacPhase diode rectifierance-based device to output a value of 2pF.In the datasheets, the peak reverse is 1μA, as indicated by the data chart.
1N4148W-7-F Features
an average rectified current of 300mA volts
a current rating of 150mA
the peak reverse is 1μA
1N4148W-7-F Applications
There are a lot of Diodes Incorporated 1N4148W-7-F applications of single-phase diode rectifier.
Polarity Protection Diode
Power converters
Ultra High-Speed Switching
Switching Diode
Welders
Recirculating Diode
Reverse Polarity Protection
DC motor control and drives
Battery chargers
Freewheeling
- ImagePart NumberManufacturerMountPackage / CaseForward VoltageAverage Rectified CurrentCurrent - Average Rectified (Io)Reverse Recovery TimeRecovery TimeMoisture Sensitivity Level (MSL)View Compare
1N4148W-7-F
Diodes IncorporatedSurface Mount
SOD-123
1.25 V
300 mA
300mA (DC)
4 ns
4 ns
1 (Unlimited)
BAV99-7-FDiodes IncorporatedSurface Mount
TO-236-3, SC-59, SOT-23-3
1.25 V
300 mA
300mA (DC)
4 ns
4 ns
1 (Unlimited)
1N4148W-7-F
VS
BAV99-7-F
- MMBD7000-7-FDiodes Incorporated
Surface Mount
TO-236-3, SC-59, SOT-23-3
1.25 V
300 mA
300mA (DC)
4 ns
4 ns
1 (Unlimited)
1N4148W-7-F
VS
MMBD7000-7-F
- BAW56-7-FDiodes Incorporated
Surface Mount
TO-236-3, SC-59, SOT-23-3
1.25 V
300 mA
300mA (DC)
4 ns
4 ns
1 (Unlimited)
1N4148W-7-F
VS
BAW56-7-F
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Diodes Incorporated's 1N4148W-7-F price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
 |  |  |  |  |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
