Analog Devices Inc. OP27GP
OP27GP
Please send RFQ , we will respond immediately.
Analog Devices Inc. OP27GP information
Type
Parameter
Mounting Type
Through Hole
Package / Case
8-DIP (0.300, 7.62mm)
Surface Mount
NO
Number of Pins
8
Operating Temperature
-40°C~85°C
Packaging
Tube
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Subcategory
Operational Amplifier
Max Power Dissipation
170mW
Technology
BIPOLAR
Terminal Position
DUAL
Number of Functions
1
Supply Voltage
15V
Terminal Pitch
2.54mm
Base Part Number
OP27
Pin Count
8
Operating Supply Voltage
16V
Number of Channels
1
Quiescent Current
5.7mA
Slew Rate
2.8V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
120 dB
Current - Input Bias
15nA
Voltage - Supply, Single/Dual (±)
±4V~18V
Input Offset Voltage (Vos)
30μV
Gain Bandwidth Product
8MHz
Neg Supply Voltage-Nom (Vsup)
-15V
Unity Gain BW-Nom
8000 kHz
Voltage Gain
123.52dB
Power Supply Rejection Ratio (PSRR)
113.98dB
Low-Offset
YES
Frequency Compensation
YES
Supply Voltage Limit-Max
22V
Dual Supply Voltage
15V
Input Voltage Noise Density
3.8nV/sqrt Hz
Height
3.43mm
Length
9.27mm
Width
7.24mm
Radiation Hardening
No
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
- Datasheets :
- PCN Obsolescence/ EOL :
- ConflictMineralStatement :
analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf
OP27GP Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 30μV voltage. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 16V voltage. Currently, linear amplifier is operating with a quiescent current of 5.7mA.
OP27GP Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
OP27GP Applications
There are a lot of Analog Devices Inc. OP27GP Instrumentational OP Amps applications.
- Vehicle electronics
- Micro signal measurement
- Multimedia playback equipment
- Integrator circuits
- Industrial applications including automation
- Information processing
- Radiation thermometry transducers
- Measurements of Wheatstone bridge
- Band-pass filter
- Computer workstations
- ImagePart NumberManufacturerPackage / CaseNumber of PinsSlew RateGain Bandwidth ProductInput Offset Voltage (Vos)Power Supply Rejection Ratio (PSRR)Common Mode Rejection RatioSupply VoltageView Compare
OP27GP
Analog Devices Inc.8-DIP (0.300, 7.62mm)
8
2.8V/μs
8MHz
30 μV
113.98 dB
120 dB
15 V
- OP27GPZAnalog Devices Inc.
8-DIP (0.300, 7.62mm)
8
2.8V/μs
-
25 μV
114 dB
120 dB
15 V
OP27GP
VS
OP27GPZ
- OP37GPZAnalog Devices Inc.
8-DIP (0.300, 7.62mm)
8
17V/μs
-
30 μV
114 dB
120 dB
15 V
OP27GP
VS
OP37GPZ
- OP27EPZAnalog Devices Inc.
8-DIP (0.300, 7.62mm)
8
2.8V/μs
-
25 μV
114 dB
120 dB
15 V
OP27GP
VS
OP27EPZ
ICHOME's Payment Terms
ICHOME offers many types of payment options, and support in multiple currencies such as RMB, US dollars, Rubles, etc. New customers can be offered COD or credit card. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
ESCROW (3rd party manages payment transfer)
PAYPAL(There is a 0,35 + 3,4% charge for using Paypal)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does ICHOME mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Analog Devices, Inc.'s OP27GP price and stock displayed on the website accurate?
ICHOME inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with ICHOME salesperson or online customer service before payment.
You Also Ask
Need Any Service, please feel free contact us: sales@ichome.com
After the electronic components have passed the quality inspection of ICHOME, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.